Parking lot management system for the construction of the need to pay attention to what?
2022-09-09 00:00:00
1: when a car park entrance in the slope, the brake control machine should be installed on a flat road or concrete pouring platform.Recommends avoiding vehicle in charge when the banpo way start.
2. Ac power should be separate wiring.It cannot be used for the same as the signal lines and the low voltage dc power line of the pipeline.Due to the parking lot management system generally are equipped with air conditioning, so the ac power should be provide.
3: license plate recognition system with ac power control main board signal lines cannot be laid, as far as possible avoid wearing in a PVC tube, if is limited by the environment, must be parallel wiring, the distance should be not less than 50 centimeters.
4: parking lot wiring all external equipment connection thread can’t be too long, so as to avoid leakage, short circuit phenomenon when parking system wiring must be the cable marking, convenient installation, debugging and maintenance.
5: when wiring to parking lot system, should be adjusted according to actual conditions to the distance between each device.If there is no equipment in the system, do not need the equipment needed for the wire laying.Entry and exit control machine or the placement of the camera position is the same.