About parking way lock screw loosening caused by the failure of elimination

2023-10-02 00:00:00

parking brake is parking brake system infrastructure, is the key equipment, if the brake doesn’t work properly, also basic paralysis in the parking lot.Parking brake of basic principle about the same, is by the controller, reducer, motor, drive mechanism, chassis, brake lever, brake rod support of this a few parts, other advanced performance, such as integration movement, preventing smashing, cooling function is just based on its added.

today is to introduce the common troubleshooting way brake, the fault is mainly about caused by loose parts, excluding is relatively simple.

sense coil if buried too weak, coupled with the car after the shock, will cause the winding deformation, resulting in feeling initial inductance, and it need to restart the sensor brake to work properly, very trouble.The solution is simple, with melting bitumen into trough hold the coil.
articulated screws are used to connect two bearings, if loose cause they link up and down is not accurate, the solution is to use a 80 mm long Ф 4 gyration adjustment between iron rod inserted into the double screw, the brake lever up and down in place.
turn arm screw loose will cause the brake brake lever up and down is not accurate, lever stop shaking will be very big, as long as we put the screw.Tighten nut can be solved.
4. The hook is used to hold balancing mechanism of spring and balance of zero adjustment function, if the screw loose, which the cause of balance, causing other components such as reducer, motor load, so as to affect the service life of the brake, the solution is to tighten it.

well, about the lock screw loosening caused by troubleshooting we introduced to this, thank you for reading.