The parking lot, system card reader fault elimination method
2023-10-18 00:00:00
a: car parking system entrance card machine appear swallowing card phenomenon, and generates fees, is how to solve?
this may be caused by the following reasons:
1. Into the card, is invalid (empty) card, card to be recycled;
2. When the card has to take card position and not take walking, feeling after release, CARDS are recycling;
3. When the card has been sent to take card position, in the sense of not freed under the premise of not removed after 15 seconds, CARDS are recycling;
4. When the card to the card machine to proofread position but can’t read the first antenna card (or the reading head failure), when CARDS are recycling;
5. When the spit card machine antenna read of the temporary card (i.e., the fixed card, free card, VIP card, etc.), the CARDS are repossessed;
6. When read spit card machine antenna based on the state of the temporary card (i.e., has painted the entrance card), the CARDS are repossessed;
7. When the ballot boxes to the electric card machine initialization, proofread the card position of card to be retrieved.
fault processing method is as follows:
1. Regularly check the card in the recycling bin, timely treatment to prevent produce relevant expenses;
2. When too many in the recycling bin card shall be the competent charging unified handling.
fault 2: parking card reader can’t normal, how to solve this?
the cause of this failure are as follows:
1. When the recycle bin is full, the pressure to no longer to spit card;
2. The entrance card reader sense of place, it can’t induction to the vehicle, not spitting.
3. Add the card deformation, cause the card card card to the card;
4. A foreign body into the card paste, cause the card card card to the card;
5. By rain into the card, the card between paste, each other can’t spit card;
processing method is divided into the following three:
1. Check whether recycling bin in the card is full:
is full, such as recycle bin card should be handled in a timely manner in the recycling bin card;
2. The simulation test at the entrance card reader to sense whether the crash or damage:
a. put to use iron to induction area, detect hints & other;Please swipe card or buttons & throughout;.Such as normal hint, said to normal;
b. if not normal, need to insert to sense the processor to pull out, in the process of pull out plug must pay attention to the corresponding gap pull plug,
like a feeling to the processor after, still can’t normal use, shall quote engineering maintenance maintenance of line testing and maintenance.
3. If the above all normal, do the following:
a. cut spit card mechanical and electrical source;
b. in the form of artificial issue temporary card hairpin, avoid entrance vehicles;
c. ways to remove the spit spit card card, the card machine and check if there is a foreign body deformation, paste or whether there is water mark:
deformation, such as card should take back the CARDS, ban continue to use;Such as card with foreign body, should be timely clean (not allowed to paste any label on the card), export testing can continue to use;If CARDS have water mark, water mark should be dry clean, exports can continue to use after testing.
d. after processed, will spit card machine electricity;
e. and check whether there is in the recycle bin card, no card to ensure the recycling bin.
f. restore automatically take card in the form of credit card.