Intelligent parking lot how to install the gate to conform to the specifications?

2023-11-10 00:00:00

parking brake looks simple, but the installation or need some details need to be aware of this, the details can make a longer service life of brake, operation more convenient.The following is the need to pay attention to several points.

control machine, the installation of the brake
to note here is that the equipment is installed must be strong, shaking don’t exist, can withstand the 100 kg/s impulse devices do not shift not loose.Control machine, brake and ground connection to be sealed at the bottom, do not leave gaps, if there is any gap requires cement flat seal.Don’t exceed the lane line box body position, must be at least 5 cm lane edge.Import control machine should be installed in the vehicle to enter to the left, is advantageous for the driver’s card.

the tao
lock screen lock screen installation should be perpendicular to the ground, Angle control in 1 & deg;, install where driver easily see, facilitate their backing.


the brake control button button installation principle is to facilitate the operation of the staff, general installation in local.

the installation of surveillance cameras
the installation of the main note here is that the camera support, support should be perpendicular to the ground, lean not greater than 1 & deg;, want to and the ground contact sealed solid base, not to exceed the lane line, shaking don’t exist, can guarantee the stability of the surveillance cameras captured.


good, intelligent parking lot system, brake is installed above the technical requirements of, thank you for reading.