Parking system monitoring image cannot display solutions

2022-04-15 00:00:00

Intelligent parking lot system standards are generally equipped with surveillance cameras, the purpose is to realize some functions such as image contrast, license plate recognition, etc., to strengthen the monitoring management of parking vehicles.But in the usual application process, the monitoring image shows don’t come out, image contrast function without image contrast is the common fault, here we make a summary on the troubleshooting methods.Fault

a: management computer no monitoring image, show only the fixed image.

the cause that causes this fault basically has two, one is a software setting is not correct, the second is video capture card.

the first reason to tackle is simpler, listening to the yard system Settings can be correctly, the specific method is:
1. Choose the correct system Settings of the video card type;
2. The open lane image contrast function;
3. See if opens the other application software of the video card;

to note here is that the video card driver from the installation package there parking system to provide the best, had better not install video card attached to the CD driver, which is one of the causes of failure.


why two solutions.Video card driver if the installation failed or damage can also cause the failure.Solve the problem of method is: in the management of computer device manager to check the video card driver installation, the installation is correct, it is best to install driver.

if there is no video card is detected, the computer may be a video card with PCI slot poor contact or damaged, can put the video card on another computer test, see if there is something wrong.

fault 2: image contrast function image contrast

this kind of the cause of the failure is usually caused by image error saving path set, the solution is to reset the image save the path.
here it is important to note that the image save path don’t use Chinese characters, the whole Angle of characters or other special characters;Path set can be reference: stand-alone path D: Photo ,;Online path ParkServer Photo or 192.168.1.1 Photo ;