The parking lot way brake how to install?Need to pay attention to what aspects?
2022-04-22 00:00:00
the first aspect is the level problem.Brake should be installed in horizontal plane, if there is a slope road surface is rough, the level should be built, wiring installation according to the drawing is ok, generally do not have what problem.
the second aspect is to sense coil test.In the intelligent parking lot system connected line can testing ground sense coil, don’t wait for buried well after feeling line to test.Test method is to sense when the red light flashing, with iron plate on the coil, long red light when take iron plate, brake lever automatic drop is normal.
the third aspect is to sense coil installation, ground sense coil in a lane 2, general installation before and after each one.Installation method is to cut the road a 10 cm deep, 2 x0. 8 m square nest, four corners cut into 45 degrees, placed 5 to 6 circle line, pressure, coil inside there is no joint, damaged, after installed, sealed with dry cement.
the fourth is the problem of brake rod length cutting, if the brake lever for cutting, you will need to adjust torque according to length to balance, can avoid the reducer motor overheating and wear.(starting from: http://www.nthuanli.cn/)