A card reader into a parking lot and the brake installation location
2022-07-04 00:00:00
1. The brake and the reading card equipment installation location.
for the ground parking lot, they put the position to ensure that vehicles entering and leaving the unobstructed, give lane width.Parking lane is generally not less than 2.5 meters, the optimal distance of 3.5 meters.Way the distance between the brake and the reading card equipment not less than 2 meters, had better be in 2.5 meters, this is to prevent the reading card vehicles hit the brake lever.
in the underground parking lot, because of the slope, so read card device should be installed at higher levels, on the ground, so the driver when I was reading card is more convenient.The tao brake installation note above brake blockage, if there are any blockage, cannot choose straight rod, should choose folding gate, folding stem point position should be from the obstacle below 1.2 meters.
overall, want to make sure of good equipment and the card reader to the brake installation location, and then in the laying of pipeline, so you can avoid because of the need to change the installation position and wiring problem.In practice, to the installed equipment and the card reader to the gate first, and then simulated with party a’s personnel to use, both sides satisfied, the pipeline on the shop again.
2. Automatic card machine and the installation position of the camera
if automatic card machine equipment for independence, such as bluetooth card reader, such as the installation position should be in the front, from the reading card equipment is about 0.3 meters.The installation of cameras in 2 to 2.5 meters high, equipped with automatic aperture lens, scope set in the position of vehicle license plates when reading a card.