Parking lot management system commissioning steps have?

Parking lot management system belongs to an important part of intelligent weak current engineering, compare system and professional, and video surveillance, building intercom, burglar alarm, public broadcasting audio and video series of the intelligence engineering projects, such as system manages the whole parking lot vehicle pass in and out of the buildings in the area and charging management, guarantee the normal and stable operation to view important parking lot system, so in the parking lot after the construction completion must conduct a comprehensive inspection and debugging, so what are the steps of parking lot management system commissioning?

a, parking system equipment line check

parking system belongs to the mechanical and electrical equipment, is through a variety of cable connect electrical and electronic components, with heavy current and weak current, advice from the high voltage check, to see if the power supply voltage is 220 v, namely a wire and a zero line, had better use multimeter to detect, because at the time of construction, there are a lot of three-phase line, are potential 2 root of fire, the voltage is 80 v, it is very important, nearly all of this is burnt out electrical equipment, and then check whether the line is wrong, according to the diagram and weak current part of the communication line CAN bus level of plus or minus, weak current equipment line connection is correct, after all check and correct, CAN on electrical test.

2, parking equipment electricity check

in after check the wiring and correct, just can have electricity.Electricity, check whether all the mechanical and electrical all start, electricity is normal, light-current system communication function is normal, and connected to the Internet.

3, parking system parameter Settings

corrective parking system can be normal after electricity, can according to the practical requirements for related equipment parameters set, specific charge management system set up, number of parking Spaces, communication protocol port, administrator privileges, fee standards;Inward and outward way brake control machine (stuffing) setup: address code set, vehicle detector sensitivity.

4.Parking system running test

equipment parameters set up, the parking system to run the type, by in and out of the detection of the entire system, gate opening, ballot boxes out of the card, credit card billing record, image, data query, and other functions, operation process, encounter problems, timely adjustment, until the system can complete parking pass in and out of the stable and efficient cost management can be put into use.(http://www.nthuanlicn)