The choose and buy the brake needs to pay attention to what?

Brake (there are many, such as automatic brake, intelligent brake, the car stop) is used in highway, originally used for parking fees, but with the development of intelligent residential area, application of the village is very popular, I believe you know the brake will be familiar.

the brake is not the most expensive in the parking lot system equipment, but absolutely is the most important equipment, because once the brake failure, will affect the whole the operation of the parking lot, could lead to the parking lot system paralysis.So, the brake when the choose and buy, pick a place too much.Here we brake put forward some Suggestions on how to choose and buy, for your reference.1. The brake using occasion.Way brake according to the ebb and flow rate can be divided into high speed brake, brake and slow medium speed tao brake, respectively corresponding to the time for: 1 seconds, 3 seconds, six seconds, suitable for no place.High speed brake for toll roads;Medium speed way brake is suitable for the intelligent building, community, etc.;The required brake is suitable for low speed is not high in the residential area.That you want to buy according to specific needs.

2. Brake control method.Brake generally there are three kinds of control mode: manual control, remote control, control machine control, can choose according to demand.

3. The brake transmission ways.General way brake drive belt transmission, hydraulic transmission, mechanical and electrical integration, etc.

belt drive is the relatively backward mode of transmission, it USES motor drive, belt transmission, noise big, equilibrium stability is poorer, and belt easy damage, short service life, in short, drawback is more, but the advantage is very outstanding, is the low cost.

hydraulic transmission stability is good, simple structure, fast transmission, and the small voice, is the ideal mode of transmission, but the impact damage rate is high, after the maintenance is more trouble, need professional personnel.

electromechanical integration is refers to the motor drive way and retarding mechanism, is the latest mode of transmission, it has good stability, simple adjustment, less faults, but also can choose according to different length motor, a more flexible.

4. The performance of the brake.This should be focused on factors that can be tested to see if the brake through some reports, such as CE, ISO, waterproof how lightning protection performance (here we secretly, we brake has four levels of lightning protection performance, a lot more than counterparts) and how manufacturers strength, etc.