Ground sense coil embedding method and details

2022-07-01 00:00:00

To introduce you to a few days ago the feeling buried coil to set environment request, this time we introduce you to ground sense coil embedding method and some of the details, hope you can install, in strict accordance with the requirements specification.
when we planned embedding location, good cutting slot, shall timely bury ground sense coil, it can avoid some debris fell into the trough.Winding embedding procedure is as follows:
1. In order to prevent trough some hard edges cut wire, can on line before the first online slot laid a 0.5 cm thick layer of sand;
2. The choice of ground sense coil requirement: should choose the skin of wear-resisting, high temperature resistant, can waterproof soft copper wire, diameter greater than or equal to 0.5 mm&sup 2;;
3. Coil to clockwise laid, number of turns is in commonly 4 to 6 turns, laying copper wire to the appropriate relaxation, put to be careful, don’t break the skin, placed a circle, and the groove bottom pressure;
4. Copper wire after the shop is good, want to leave a good lead, usually on the safety island end edge line, set aside the thread length is in 1.5 meters or so;
5. Compaction and coil lead wire, 0.5 cm thick sand on the shop, it can prevent the coil skins by high temperature melting;
6. With thin concrete pouring trough, compaction, flush with the road;(http://www.nthuanli.cn/)